Introduction: Leather paint stripping, Leather Paint Removers and Leather Processing-Remover for Cured and Uncured Paints and Coatings
PRODUCT DESCRIPTION: LeatherStrip_9160 is a specially formulated water based leather paint removers for the cost effective and environment friendly Leather Paint stripping of uncured and old cured paints and coatings such as epoxies and urethane.
LeatherStrip 9160 effectively removes latex, alkyd, acrylic paints, and many other high performance coatings such as two component epoxy and urethane for leather paint stripping. This product contains no known carcinogens, methylene chloride or other chlorinated solvents. LeatherStrip_9160is an extremely effective and easy-to-use paint stripper; it is ideal for use in almost any paint stripping application.
LeatherStrip 9160 is a molecule expanding formula, It works by lifting the coating. LeatherStrip 9160 is a low volatility paint stripper; this means that instead of evaporating rapidly it remains on surfaces to lift and soften the paint. LeatherStrip 9160 removes more paint in fewer applications than methylene chloride containing paint strippers. Since it is water-soluble, cleans up is easy.
LeatherStrip 9160 is ideal for use in for Leather paint stripping in leather processing of rework automotive leather. The paint removal process in the restoration of brick, concrete, wood or sandstone buildings can be completed without the abrasive blasting process. This will ensure that the desired aesthetic qualities and appearance of the original structure are not subjected to any unwanted mechanically imposed physical damage which can occur during mechanical blast cleaning procedures. Consult our sales personnel for additional information.
LeatherStrip 9160 was engineered to be a one-stop leather paint removers for use in all industries.
Prior to use, test the compatibility of the surface or part being stripped to make sure that the chemical does not also attack it.
LeatherStrip_9160 must be heated to 140 to 180°F. Because LeatherStrip_9160 does not produce powerful fumes, it can be used safely indoors with ventilation. Furthermore, LeatherStrip 9160 contains no caustics or other harsh chemicals.
LeatherStrip 9160 is diluted with water., and is formulated to achieve optimum results using a soak or spray application method.
Because it is difficult to determine the type and amount of coatings present on a surface, perform a small test first. This will determine LeatherStrip 9160 effectiveness, coverage, and the approximate amount of time required for it to work.
Ventilate enclosed areas, and wear oil resistant rubber gloves and safety glasses. If LeatherStrip 9160 gets on skin or into eyes, rinse thoroughly with water. See the Material Safety Data Sheet for more detailed hazard evaluation and safety information.
WARNING: The sludge LeatherStrip 9160 produces when removing paint cna be checked to see if it meets local, state and federal regulations.
Consult appropriate local, state and federal regulations regarding waste disposal or discharge. Do not permit waste waters to seep into ground or discharge into sewer
LeatherStrip_9160is supplied in 1 Gallon, 5 gallon pails and 55 gallon drums, Intermediated bulk containers such as Toes.
Storage/Shelf Life: Keep in sealed containers and store in a well ventilated
Area. Shelf life is indefinite as long as material is prevented from evaporating. Mix well and form the emulsion before use.
Flash Point: in excess of 212 F (100 c)
Freezing Point: 32 F (0 c)
Ph : 2-3 (Direct Reading)
Temperature use Range: If the temperature is below 40 F., LeatherStrip_9160 may work too slowly to be effective.
Note: The information presented herein is our interpretation of certain test results and field experience to date. The information is not to be taken as warranty or representation for which we assume legal responsibility, nor as permission or recommendation to practice any patented invention without a license. It is offered solely for your consideration, investigation and verification